Vapotheque • 050
DUST REMOVAL
1
Start by dusting the wheelchair using the gun alone without accessories.
I steam the wheelchair at a distance of about 10 cm from the top to the bottom to remove dust and residues.
2
After dusting, clean and disinfect from top to bottom, from the least to the most dirty (backrest, seat and wheels).
CLEANING AND DISINFECTION OF BACKREST + SEAT
1
After dusting the backrest and seat, I attach the orange square to the large rectangle brush using the clips or to the large triangle brush using the elastic band. The microfibre should be tightly stretched over the brush.
Remember to use the entire useful surface of the microfiber on the brush! (See the video at the bottom of the page)
2
I move the brush back and forth in "steam - wipe" mode (I pass my microfiber brush while activating the steam, moving forward. Then I pull the brush towards me, releasing the trigger to "pick up" the dirt/dust).
ATTENTION: no movement with continuous steam! This does not allow the microfiber to wipe the surfaces properly.
BEFORE/AFTER
CLEANING AND DISINFECTION OF HANDLES
1
With the gun alone, without accessories, I apply the steam to a maximum of 8 cm from the surface.
2
I wipe with the sand-coloured glove.
CLEANING AND DISINFECTION OF WHEELS
1
I mount the long sprayer to diffuse the steam in a targeted manner, allowing thorough dusting and cleaning of all dirt.
2
I wipe with the sand-coloured glove.
BEFORE / AFTER